KAT VAT ALUMINUM/GLASS remaining inventory

Buy, sell or trade your 3D Printer items with others.
Adrian_Garland
B9 Maker
B9 Maker
Posts: 33

KAT VAT ALUMINUM/GLASS remaining inventory

Post#1 » Sat Jun 15, 2019 8:32 pm

Greeting folks,
As many of you may remember, I put countless hours of work back in 2013 creating a lightweight aluminum vat during the early open source days.
I promptly ended production when Mike provided his aluminum version..
Turns out the official B9Creations design was a bit limited.
Then the orange vat pretty much made these obsolete convenience wise..
However I still had remaining parts and took the time to assemble them.
I recently got permission to list these for sale here on the forum…

FEP SOLUTION? YES

GOODBYE PDMS forever!
Such a fantastic breakthrough and relief IMO.
FEP never clouds, and if ever scratched, can easily be replaced.

These vats are ROCK solid, lightweight, and all glass is scratch resistant Borosilicate glass.
Built to last forever!


I currently have 19 left, (16 update) first come first serve..
They also work with PDMS. But with this tech it's now officially a thing of the past.

Email me for more details. K94b9vats@gmail.com

Thanks so much everyone for your support in the early days!
Kind regards, Kirk

(Apparently I lost my old account and waiting for new user "kirk" to clear moderators...)
email still the same as way back in 2013 k94b9vats@gmail.com TRUSTED SELLER!

Image
Image
Last edited by Adrian_Garland on Tue Jul 16, 2019 3:18 pm, edited 2 times in total.

Adrian_Garland
B9 Maker
B9 Maker
Posts: 33

Re: KAT_VAT FEP solution? Version 1.1 1.2 FEP!!!

Post#2 » Sat Jun 15, 2019 11:03 pm

UPDATE:

Have done quite a bit of testing and have done castings as well.
Just added some more pictures.. : )
About to send out a notice to my mailing list so this will likely be gone soon.
16 left ATM as of 7/16/2019


Regards, Kirk k949bvats@gmail.com
Last edited by Adrian_Garland on Tue Jul 16, 2019 3:21 pm, edited 2 times in total.

Adrian_Garland
B9 Maker
B9 Maker
Posts: 33

KAT VAT ALUMINUM/GLASS remaining inventory

Post#3 » Mon Jun 17, 2019 7:26 pm

Will work with Version 1.1 or 1.2
19 each remaining
Please email me for details: K94b9vats@gmail.com


Image

Adrian_Garland
B9 Maker
B9 Maker
Posts: 33

KAT VAT ALUMINUM/GLASS remaining inventory

Post#4 » Mon Jun 17, 2019 7:28 pm

OK, here's my first test print: B9Creator V1.1 @ 50XY resolution Z=25.4 micron slices:
Stock B9Creator resin settings, no strain on machine, smooth as silk, it's a success!

Image
Image
Image
Image
Last edited by Adrian_Garland on Tue Jul 16, 2019 3:22 pm, edited 2 times in total.

Adrian_Garland
B9 Maker
B9 Maker
Posts: 33

Re: KAT VAT ALUMINUM/GLASS remaining inventory

Post#5 » Tue Jul 02, 2019 1:17 pm

A few more images: Yep 100% FEP, plus one small preparation step.

But well worth it, prints are flawless! Factory print settings with B9 Emerald.

This just works, this is as good as it gets at 50XY on an older lower resolution Version 1.1 machine..: )
I wish I had a version 1.2 machine so I could print some 30XY...

Image
Image

User avatar
TAJS
B9 Maker
B9 Maker
Posts: 471

Re: KAT VAT ALUMINUM/GLASS remaining inventory

Post#6 » Tue Jul 02, 2019 1:59 pm

I have a B9 version 1.2 with a new projector for sale $1250. PM if you are interested.

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6598

Re: KAT VAT ALUMINUM/GLASS remaining inventory

Post#7 » Tue Jul 02, 2019 7:05 pm

I still have my Double Dog all black vat u made. Not in use because I am running the Core 530 since production started.

Robert
Dance like nobody's watching!

Adrian_Garland
B9 Maker
B9 Maker
Posts: 33

Re: KAT VAT ALUMINUM/GLASS remaining inventory

Post#8 » Tue Jul 02, 2019 7:52 pm

Wow TAJs total co-incidence.. I just made an offer on the v 1.2 on ebay for that EXACT amount. Strange co-incidence!
I will PM you for more details..
Thanks-

Yes Robert, those were the originals.. (without plating)..I still have a few myself..
But yes FEP would work in that vat as well.
The non-plating thing was supposedly the limitation for casting resins though on the Double Dogs?

There is a special trick to making it happen though.. : )
Last edited by Adrian_Garland on Sun Jul 07, 2019 11:07 pm, edited 2 times in total.

User avatar
TAJS
B9 Maker
B9 Maker
Posts: 471

Re: KAT VAT ALUMINUM/GLASS remaining inventory

Post#9 » Fri Jul 05, 2019 6:27 pm

...that unit probably doesn't have a new projector...

Adrian_Garland
B9 Maker
B9 Maker
Posts: 33

Re: KAT VAT ALUMINUM/GLASS remaining inventory

Post#10 » Sun Jul 07, 2019 10:47 pm

Yes I am in TAJS, sent you PM's.
Can't wait to get the 1.2 and see what it can do!

Here are the castings, so it's full circle.. : )

Image

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6598

Re: KAT VAT ALUMINUM/GLASS remaining inventory

Post#11 » Mon Jul 08, 2019 3:03 pm

Thinking about selling my 1.2 also. have several vats and one aluminum Black DD vat with glass window. Been kept under dust cover since started with the Core machine. Simple mod for cooling the electronics also.

Robert Howle
Dance like nobody's watching!

Adrian_Garland
B9 Maker
B9 Maker
Posts: 33

Sharp Tiny Crown

Post#12 » Tue Jul 16, 2019 3:40 pm

The model was not that great to begin with- but look at the sharpness of the crown!
That concludes the testing...100% success wraps up this years long project with a bang.

50XY resolution

Image
Image
Image

ONLY 16EA remaining. No more ever produced. Don't miss out!

Giving notice to my 200+ contact email list this weekend, so they might not last much longer?

Will include method videos in that mailing, etc.. lots of fun. : )

Kirk

k94b9vats@gmail.com

Return to “For Sale”

Who is online

Users browsing this forum: No registered users and 0 guests

cron
Close Menu Shop Forum