Z-Axis Screw Cleaning

Hardware issues, problems and solutions
Bexley
B9 Maker
B9 Maker
Posts: 224

Z-Axis Screw Cleaning

Post#1 » Wed Aug 30, 2017 8:41 pm

Anybody know what the z-axis screw on v1.2 is lubed with? I've seen lots of recommendations as to what to use, but nobody stating what is actually on there when you buy the machine. I'm trying to diagnose why my prints are now about ten percent shorter (but correct in the x and y) than they're supposed to be, so I'm cleaning/re-lubing the screw.

Matt
B9 Moderator
B9 Moderator
Posts: 147
Contact:

Re: Z-Axis Screw Cleaning

Post#2 » Thu Aug 31, 2017 8:22 am

They come with a white lithium grease on the threads.

Bexley
B9 Maker
B9 Maker
Posts: 224

Re: Z-Axis Screw Cleaning

Post#3 » Thu Aug 31, 2017 11:33 pm

Matt wrote:They come with a white lithium grease on the threads.


Thanks!

Return to “Troubleshooting”

Who is online

Users browsing this forum: No registered users and 1 guest

Close Menu Shop Forum