Ok so here are my results!
I think it worked GREAT besides the first 2 base layers being hard to release!
These are my times.......
Software Version: Version 1.7.3 Copyright 2014 B9Creations, LLC www.b9creator.com
Configuration: B9Creator v1.1.0, XY at 50 microns
Job Name: C:/Users/Owner/Desktop/deco band 4.b9j
Name: deco band 4
XY Pixel Size: 50 µm
Slice Thickness: 31.75 µm
Total Layers: 828
Material Volume: 6.05 ml
ID: Copy-lower time mix, Description: Hi-Res, lost wax suitable.
Calc Base: 1.717, Used Base: 1.716
Calc Over: 0.086, Used Over: 0
Calc Attach Layers: 2, Used Attach Layers: 2
Calc ABase: 17.17, Used ABase: 8
Calc AOver: 0.86, Used AOver: 0
Unsupported Pixel Multiplier: 0.8
Shutter Open Speed : 75
Shutter Close Speed : 70
Pre Exposure Delay (Settle) : 7
Post Exposure Delay (Kick) : 2
Post Release Delay (Breathe) : 2
Overlift Cutoff (mm) : 2
Initial Overlift (mm) : 3
Subsequent Overlift (mm) : 2
Dip (mm) : 0
I just was hoping people could help me with the 1 issue i had which is the top of the ring
the detail isn't there. I was having a hard time making that work with the pdms. What could
this be from and how can i fix it? Please help.