Good morning everyone , this is my first post.
I'm having a lot of problems with printing.
I did several tests for a significant amount of information.
The following images and video.http://postimg.org/image/wfj314g2j/http://postimg.org/image/d476ldyl7/http://postimg.org/image/4yk2q440r/http://postimg.org/image/cmc15j90b/
The machine I'm working on this with about 1300 hours of use, so I decided to make the maintenance of all components that can wear out over time.
We exchanged the actuator and linear rail, to see if we would have some result , but did not get a significant improvement.http://postimg.org/image/ncznr7mmz/
After I decided to change the lamp . I saw that the inner glass is broken in half, think it's not normal.http://postimg.org/image/52dw6d9i3/http://postimg.org/image/wuucu51zv/http://postimg.org/image/jx7jhnpej/
I'm putting the new lamp and I will do some more testing.
I wonder if I'm on the right track .