Page 1 of 1

yellow printing issues

Posted: Thu Nov 10, 2016 7:56 am
by panastation
I have noticed that things i have printed in cherry and emerald have less surface issues than yellow. My items print but they sometimes have a rough surface----NOT grow lines---i thought it might be the old resin in vat so i changed it to new yellow resin completely. My msn is at 1.2 i have tried with bleed on and off...using standard yellow b9 settings. :( hd version
[url]Image[/url]

Re: yellow printing issues

Posted: Thu Nov 10, 2016 10:38 am
by Robert Howle
Do a calibration print in yellow and compare to your calibration print in green. May need to up the MSM a little.

Robert

Re: yellow printing issues

Posted: Thu Nov 10, 2016 11:47 am
by panastation
hi

yeah i had alredy printed at 1.35 msn and supports were not right so that was 2 high.

Re: yellow printing issues

Posted: Thu Nov 10, 2016 4:54 pm
by Robert Howle
Do you have a picture of the Calibration print?

Robert Howle