FastWax Instructions For Use

B9_Sales
B9 Moderator
B9 Moderator
Posts: 23

FastWax Instructions For Use

Post#1 » Thu Oct 15, 2020 10:19 am

Hi!

You can find the FastWax Instructions for Use here:https://www.b9c.com/fastwax

rkundla
B9 Maker
B9 Maker
Posts: 82

Re: FastWax Instructions For Use

Post#2 » Thu Dec 03, 2020 10:48 pm

You should double-check your burn out instructions.

For Celsius you have 2° per minute (120° per hour) while in Fahrenheit you have 28° per minute (or 1680° per hour).

I've seen this error on other resin burnout charts out on the internet, so I assume you mean 2.8°F per minute (or 168° per hour) which closer to the conversion factor of 9/5 from Celsius to Fahrenheit (actually, 2°C would be 3.6°F per hour per the formula).

User avatar
akgold
B9 Wizard
B9 Wizard
Posts: 2101

Re: FastWax Instructions For Use

Post#3 » Fri Dec 04, 2020 2:19 pm

Just let it bench set for at least 1 hour 2 or 3 is even better.
Place the can in the kiln room temp. turn kiln up to burn out temp of 1450 Deg F. No ramp just let it go straight to high temp.
Hold for 3 hours minimum, ramp kiln down 200 deg per hour or just reduce the temp slowly to cast temp.
I still use my shop Vacuum to suck out any residuals left or you can use your compressor air but Vacuum is better.
And cast it.
I'm so far behind I think I'm First !!

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6629

Re: FastWax Instructions For Use

Post#4 » Sat Dec 05, 2020 12:10 pm

Been doing the same burnout as AK for over a year with great results (all B9 castable resins). Our times are slightly different, but same strategy.

Robert
Dance like nobody's watching!

Return to “FastWax”

Who is online

Users browsing this forum: No registered users and 1 guest

Close Menu Shop Forum