Page 1 of 1

Need help with a larger print

Posted: Thu Jun 06, 2019 10:24 am
by kmchone
Hi All,

I have a simple bracelet that is 72mm in diameter and it doesn't fit the build table of my Core 530. I would like to print it in one piece so thought I would see if someone would print it in Emerald green for a fee and shipping charge. If you have time to do this in the next couple of days, I would appreciate the help!

Thanks!
Kevin
HMJ
Astoria, OR

Re: Need help with a larger print

Posted: Thu Jun 06, 2019 3:05 pm
by Robert Howle
You can't print in two pieces and then join with wax or resin after curing? Done it many times myself and for others on my 530.

Re: Need help with a larger print

Posted: Fri Jun 07, 2019 2:01 pm
by kmchone
Yes, we can can certainly do that. The boss wanted it one piece so I thought I would see about it. Thanks for the reply. Cheers

Re: Need help with a larger print

Posted: Fri Jun 07, 2019 4:33 pm
by akgold
Ask anyone on FB 3dprinting pages yet?

There are several there that have 530
who sold you your 530? Who ever it was they would most likely have a 550 themselves.
Cept Robert I know he only had the 530.
Call your rep.

Re: Need help with a larger print

Posted: Sat Jun 08, 2019 3:33 pm
by Robert Howle
Red Door distributor has both machines.

Robert

Re: Need help with a larger print

Posted: Mon Jun 10, 2019 10:53 am
by kmchone
We got the 530 direct from B9Creations using their financing. But we bought our 1.1 and 1.2 from Red Door. I'll give them a ping and see. Thanks for the reference, really appreciate it!