round is oval

- Operation
- Troubleshooting
jbdesignss
Newbie
Newbie
Posts: 2

round is oval

Post#1 » Fri Jul 21, 2017 1:24 pm

I recently adjusted our b9 to the 70 micron xy position. prior to this the machine was working great. Now when we do a test print of a perfect circle it prints slightly oval. We are using an VGA to USB adapter between the projector and the laptop. I am being told that the adapter is the problem. Is there somewhere else to look to resolve this issue ? It just doesn't seem likely that the adapter would for no reason go bad. We have a huge back log of work and are desperate to get the machine fixed if you can help please call me 8082274683 We are in Honolulu Hi.

User avatar
Metalcaster
B9 Wizard
B9 Wizard
Posts: 1293
Contact:

Re: round is oval

Post#2 » Fri Jul 21, 2017 4:42 pm

I would check the projector alignment. when moving it, it is very easy to be a tiny amount out one way or the other... I think if it is slightly out of alignment, You would get a very slightly oval shape. You can print a square and you will probably have a lot of banding lines due to the misalignment.

jbdesignss
Newbie
Newbie
Posts: 2

Re: round is oval

Post#3 » Sat Jul 22, 2017 3:13 am

Thank you !

The issue has been resolved... Long story but its working fine now.

Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 1 guest

cron
Close Menu Shop Forum