Printing issue

A 1:1 mix of Red and Cherry, yielding a lost wax capable resin tuned for 30 - 70 micron slice thickness
romannysh@gmail.com
B9 Maker
B9 Maker
Posts: 14

Printing issue

Post#1 » Sat May 19, 2018 8:51 pm

Hi guys, I need your advice. I have an issue with printing of my rings. As you can see on the pictures, the bottom layer of the large surface doesn't stick well. I use 1:1 mix of cherry/red, standard printed setting, 30xy50z (today I tried 30xy30z - the same result). What would you suggest to do? Thank you for your help in advance.
Roman
Attachments
unnamed.jpg
unnamed (2).jpg
unnamed (1).jpg

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6618

Re: Printing issue

Post#2 » Sun May 20, 2018 2:29 am

Need to see your layout with supports.

Robert Howle
Dance like nobody's watching!

romannysh@gmail.com
B9 Maker
B9 Maker
Posts: 14

Re: Printing issue

Post#3 » Sun May 20, 2018 11:31 am

Thank you Robert,
here is my layout screen shot.
Attachments
Untitled.jpg

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6618

Re: Printing issue

Post#4 » Sun May 20, 2018 6:57 pm

If u rotate the model and use a base u wont' have the horizontal surfaces to support Very few supports needed then.

print screen rotate.JPG


Just a rotated ring to show u the idea of rotation to avoid horizontal surfaces.

print screen rotate 2.JPG

Rotated models kyle 1.JPG
Dance like nobody's watching!

romannysh@gmail.com
B9 Maker
B9 Maker
Posts: 14

Re: Printing issue

Post#5 » Sun May 20, 2018 11:12 pm

Wow, thank you so much, Robert! Could you tell me, did you add that main support leg to the bottom of the shank in Rhino or it is made in B9 software? Thank you
Attachments
print screen rotate 2.JPG
print screen rotate 2.JPG (40.94 KiB) Viewed 823 times

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6618

Re: Printing issue

Post#6 » Tue May 22, 2018 3:32 pm

Base was started by Justin yrs ago. We all called it the Justine Base. Do it in CAD so u can adjust the two pieces (oval disc and support). Add it before you export then add the other supports as needed.

Give me your email and I will send u the one I use. I'll send u the .3dm file. Can't post here.

Robert
Dance like nobody's watching!

Return to “Red Cherry 1:1 Mix”

Who is online

Users browsing this forum: No registered users and 1 guest

cron
Close Menu Shop Forum