Anybody tried printing black at 50z yet?

A general purpose resin tuned for 20 - 200 micron slice thickness
Bexley
B9 Maker
B9 Maker
Posts: 224

Anybody tried printing black at 50z yet?

Post#1 » Tue Jun 02, 2015 1:10 pm

Like the subject line says. I have little trouble printing with SubG+ at thin slices, but I occasionally need to print large low detail items, where the shorter print time would be beneficial. I have yet to dial in a SubG+ mix that prints well at 50z, though, so I'm thinking of getting some black (or switching entirely from SubG+). But I'd like to see what things look like before making the jump.

fcort
B9 Maker
B9 Maker
Posts: 388
Contact:

Re: Anybody tried printing black at 50z yet?

Post#2 » Tue Jun 02, 2015 1:23 pm

I have printed with the B9 Black at 50 microns and I am very happy with the results.
I also have printed at 50x 100 slice, 50x200 slice and models have come out very nice.
I would say that if your planning to print with thick slices make sure you use a good amount of supports.

Hope this helps.
Best,
Fernando
Red Door Distributions
www.reddoordistributions.com
619-564-6698

Bexley
B9 Maker
B9 Maker
Posts: 224

Re: Anybody tried printing black at 50z yet?

Post#3 » Tue Jun 02, 2015 6:46 pm

It does, thanks. I've ordered one more bottle of the SubG+; if I can't get decent prints at 50z by the time I've gone through it all, I'll make the switch.

Return to “B9R-2-Black”

Who is online

Users browsing this forum: No registered users and 1 guest

cron
Close Menu Shop Forum