Success!

Post photos of your Creations!
User avatar
PandaP
B9 Maker
B9 Maker
Posts: 199

Success!

Post#1 » Thu Sep 12, 2013 2:55 am

Got everything working and printing properly! Resolution is 50xy and 38z and the resin is a 2:1 mix of cherry and red.
Image

gavi
B9 Maker
B9 Maker
Posts: 183

Success!

Post#2 » Thu Sep 12, 2013 3:00 am

Great, thanks for keeping us updated!

User avatar
noahbern
B9 Maker
B9 Maker
Posts: 374

Success!

Post#3 » Thu Sep 12, 2013 5:06 am

What times are you using?

User avatar
mikej
B9 Moderator
B9 Moderator
Posts: 4190
Contact:

Success!

Post#4 » Thu Sep 12, 2013 5:18 am

Can't wait to see the castings!
Measure Twice, Cut Once.

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6626

Success!

Post#5 » Thu Sep 12, 2013 8:29 am

Also having good results with 2:1 mix. 8 sec and 2 sec. 8 settle and 3 breathe. You will have to get Gavi to give u his numbers. Nice going Gavi.
Dance like nobody's watching!

User avatar
PandaP
B9 Maker
B9 Maker
Posts: 199

Success!

Post#6 » Thu Sep 12, 2013 1:30 pm

I'm using 14 and 2, but it's nice to know I can try dropping it to 8. I'm using 3.5 settle and 1.5 breathe. I'd like to try upping the resin to maybe a 3:1 to get even more detail :D But the details are pretty fantastic right now. Also need to try upping the resolution to 25xy.

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6626

Success!

Post#7 » Fri Sep 13, 2013 1:46 am

I think I'm using opposite of you 2 parts red to 1 part cherry?
Dance like nobody's watching!

m0delista
B9 Maker
B9 Maker
Posts: 19

Success!

Post#8 » Fri Sep 13, 2013 4:11 am

Wooon Great Job !!

User avatar
PandaP
B9 Maker
B9 Maker
Posts: 199

Success!

Post#9 » Fri Sep 13, 2013 12:20 pm

Quote from Robert Howle on September 13, 2013, 07:46
I think I'm using opposite of you 2 parts red to 1 part cherry?


Oh I guess we are! More testing needs to be done then :D For science!

jeremy
B9 Maker
B9 Maker
Posts: 120

Success!

Post#10 » Wed Sep 25, 2013 1:35 pm

hi panda, I was wondering if you could do a screenshot of all your settings? I've also been attempting 38microns w/ 2:1 (cherry dominant) resin. i'm going for round 4 tomorrow with zero luck so far, I get the 14 and 2 but just wondering on the rest. thanx, btw the rings look excellent, how did they cast.

User avatar
PandaP
B9 Maker
B9 Maker
Posts: 199

Success!

Post#11 » Wed Sep 25, 2013 2:00 pm

I can take some and get them to you for sure. The rings have been turning out well but I'm still fiddling with cure settings. I took it down to 8 seconds from 14 but I think it was too low. I will try again at 11 seconds I think. I'm casting friday because that was the earliest my teachers would let me test it haha but I'll let you know!

jeremy
B9 Maker
B9 Maker
Posts: 120

Success!

Post#12 » Wed Sep 25, 2013 2:09 pm

awesome! that would help me immensely. just curious what the reason is for changing the cure settings? all this is like another language to me so sorry for any questions that may be elementary. just got my machine on Friday. thanx for the quick reply

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6626

Success!

Post#13 » Wed Sep 25, 2013 4:25 pm

jeremy read the posts under Photo gallery and the Red and Cherry sections. There is lots of info there. Go back about couple of months. Also tips and tricks.
Dance like nobody's watching!

jeremy
B9 Maker
B9 Maker
Posts: 120

Success!

Post#14 » Fri Sep 27, 2013 2:52 am

ImageImagehi all, finally achieved some partial success at 38 microns using Roberts settings in resin ratio. one problem though, in the images attached it seems as though the halo ring got a bit squashed where the cutouts are, the top corner cut out in particular is actually closed. also the partial azures on the halo did not print. I am wondering if this is a support issue or what? the quality is great on the rest of the ring and also the other shank printed great. any suggestion would be awesome, thanx in advance

jeremy
B9 Maker
B9 Maker
Posts: 120

Success!

Post#15 » Fri Sep 27, 2013 2:53 am

ok how do you attach images? sorry i'm new here.

User avatar
mikej
B9 Moderator
B9 Moderator
Posts: 4190
Contact:

Success!

Post#16 » Fri Sep 27, 2013 3:17 am

You have to clic the "Reply" option on the lower right tab on the page. Then you can add image files.
Measure Twice, Cut Once.

jeremy
B9 Maker
B9 Maker
Posts: 120

Success!

Post#17 » Fri Sep 27, 2013 3:20 am

here are the images for the above post.
Image
Image

jeremy
B9 Maker
B9 Maker
Posts: 120

Success!

Post#18 » Fri Sep 27, 2013 3:22 am

that criss cross part is kinda rounded when it should be more like a pierced hole if that makes sense

mongerdesigns
B9 Maker
B9 Maker
Posts: 139

Success!

Post#19 » Fri Sep 27, 2013 3:53 am

what's the white stuff all over it?

jeremy
B9 Maker
B9 Maker
Posts: 120

Success!

Post#20 » Fri Sep 27, 2013 4:03 am

good question, not sure

Return to “Photo Gallery”

Who is online

Users browsing this forum: No registered users and 1 guest

Close Menu Shop Forum