printing problems... help

B9Creator - Ideas and Discussions
gonzaloalgranados
B9 Maker
B9 Maker
Posts: 12

printing problems... help

Post#1 » Tue Feb 20, 2018 2:12 pm

Hi
I need help with some printing problems. since a couples weeks ago ago my machine (1.2) is not working good. the layers are falling in all the printings. i already calibrated the machine but in the claibration everiting looks really good the letters, the meassures are correct in everyting but the problem starts when i begin to print some ring or anything, if you can see the problem starts at a specific height. i have the machine in a closed room with a controled temperature at 20 C, in fact i already changed the computer and used red and yellow resin trying to discard everithing that i read and issues that i already had in the past but noting works.
Attachments
IMG_1105.jpeg
IMG_1042.jpeg
IMG_1041.jpeg
IMG_1039.jpeg
IMG_1048.jpeg
IMG_1047.jpeg
IMG_1045.jpeg
IMG_1044.jpeg
IMG_1043.jpeg

attaway@highfiber.com
Newbie
Newbie
Posts: 6

Re: printing problems... help

Post#2 » Wed Feb 21, 2018 5:13 am

I have had some problems with slicing in the past. You may want to previewed your print layers to make sure that the slicing worked correctly.

gonzaloalgranados
B9 Maker
B9 Maker
Posts: 12

Re: printing problems... help

Post#3 » Wed Feb 28, 2018 12:40 pm

i check but everything is good thank you sr... i can't find the problem because everything looks correct and the machine from one moment to another began to fail, from an specific heigh the layers are falling. i need help from the company, this is the third time that i m needing support and i dont know why i never get a solution from the b9 support team... i thought that the forum was an idea of the company for helping.

Aaron RMW
B9 Maker
B9 Maker
Posts: 136

Re: printing problems... help

Post#4 » Wed Feb 28, 2018 12:49 pm

you may want to make sure that your z axis rod is clean, if it is happening at a specific height every time that seems like a failure of the z mechanism at some point. it's strange that you haven't heard back from support.

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6551

Re: printing problems... help

Post#5 » Wed Feb 28, 2018 1:58 pm

Have u tried a different model to make sure u dont' have missing layers.

Post picture of your layout.

Need to post questions at the support portal. http://www.b9c.com/support

robert
Dance like nobody's watching!

Aaron RMW
B9 Maker
B9 Maker
Posts: 136

Re: printing problems... help

Post#6 » Wed Feb 28, 2018 2:25 pm

maybe upload the sliced file for someone to check?

gonzaloalgranados
B9 Maker
B9 Maker
Posts: 12

Re: printing problems... help

Post#7 » Fri Mar 02, 2018 2:56 pm

the problem was the z axis thanks for the help...

Aaron RMW
B9 Maker
B9 Maker
Posts: 136

Re: printing problems... help

Post#8 » Fri Mar 02, 2018 3:38 pm

what exactly was wrong with the z axis if you don't mind me asking?

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 3 guests

Close Menu Shop Forum