Printing troubles

A lost wax capable resin tuned for 30 - 50 micron slice thickness
User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6620

Printing troubles

Post#101 » Sun Oct 19, 2014 2:41 pm

Here is the correct one. This was 50 xy and 31.75 Z.


Image
Dance like nobody's watching!

User avatar
RobertH
B9 Maker
B9 Maker
Posts: 351

Printing troubles

Post#102 » Sun Oct 19, 2014 8:01 pm

Quote from Robert Howle on October 19, 2014, 20:41
Here is the correct one. This was 50 xy and 31.75 Z.


Image


would this also work for 1.2hd 1:1 MIX?

User avatar
Metalcaster
B9 Wizard
B9 Wizard
Posts: 1293
Contact:

Printing troubles

Post#103 » Mon Oct 20, 2014 5:24 am

Hi Robert H,
Going to give it a try tomorrow after recalibrating. Thank you. Will lrt you know how it works out.
Daniel

you_b@hotmail.com
B9 Maker
B9 Maker
Posts: 61

Printing troubles

Post#104 » Mon Oct 20, 2014 5:36 am

Thanks Robert. I have been using these settings, but changed the shutter speed to 85%, because at 90, it was moving a bit too forceful. At 85, it moved a lot more smooth. Today, I am going to try and print with the scale factor adjusted to 1.015, as suggested in an earlier post. Hopefully that will give me prints much closer to the size I am looking for.

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6620

Printing troubles

Post#105 » Mon Oct 20, 2014 10:32 am

That post is for the 1.1 machine only and at 31.75 Z and 50 xy.
Dance like nobody's watching!

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6620

Printing troubles

Post#106 » Mon Oct 20, 2014 10:33 am

These are settings for 1.2 HD machine. For 1:1 mix at 30xy and 30 Z only!


Image
Dance like nobody's watching!

User avatar
akgold
B9 Wizard
B9 Wizard
Posts: 2081

Printing troubles

Post#107 » Mon Oct 20, 2014 10:58 am

Geeze
That is a three hour difference between the machines,
It looks like the same model used with both having 823 slices is that true?
I'm so far behind I think I'm First !!

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6620

Printing troubles

Post#108 » Mon Oct 20, 2014 12:24 pm

The short curing times are due to the more powerful light source and proximity to the vat. Slicing is really not much diff between 31.75 and 30 Z. Those are not from the same model in my screen captures.
Dance like nobody's watching!

Return to “B9R-1-Cherry”

Who is online

Users browsing this forum: No registered users and 1 guest

cron
Close Menu Shop Forum