setting for job at 50 microns and 40 slicing

Using the software
hassan.ahmed708
Newbie
Newbie
Posts: 9
Contact:

setting for job at 50 microns and 40 slicing

Post#1 » Fri Nov 13, 2015 12:48 pm

dear mike ..
i just wana know the setting for my job ..
the peice is coming but some times it drops into the resin..
and some tym it comes but it is totally melted i am very confused...

User avatar
mikej
B9 Moderator
B9 Moderator
Posts: 4182
Contact:

Re: setting for job at 50 microns and 40 slicing

Post#2 » Fri Nov 13, 2015 12:52 pm

Are you using a v1.2 machine?

Please ensure the projector and build table calibrations are correct and use the default settings for your selected material (Cherry?).
Measure Twice, Cut Once.

hassan.ahmed708
Newbie
Newbie
Posts: 9
Contact:

Re: setting for job at 50 microns and 40 slicing

Post#3 » Fri Nov 13, 2015 1:48 pm

yes i am using v1.2 ...
and the calibration of projector and build table is correct..
you may know khursheed in pakistan?

hassan.ahmed708
Newbie
Newbie
Posts: 9
Contact:

Re: setting for job at 50 microns and 40 slicing

Post#4 » Fri Nov 13, 2015 1:50 pm

this is my platform
Attachments
Screenshot (3).png

hassan.ahmed708
Newbie
Newbie
Posts: 9
Contact:

Re: setting for job at 50 microns and 40 slicing

Post#5 » Fri Nov 13, 2015 1:54 pm

and i am using green resin i dont know the name..
what you prefer what resin should i use for jewellery making purpose?
i bought machine resently from UAE assambled machine but they didnt gave me resin and PDMF..

User avatar
mikej
B9 Moderator
B9 Moderator
Posts: 4182
Contact:

Re: setting for job at 50 microns and 40 slicing

Post#6 » Fri Nov 13, 2015 2:45 pm

Most castable resins are similar to Cherry. You could try using the default settings for Cherry first. If that doesn't work you will need to experiment and manually enter exposure times.
Measure Twice, Cut Once.

hassan.ahmed708
Newbie
Newbie
Posts: 9
Contact:

Re: setting for job at 50 microns and 40 slicing

Post#7 » Fri Nov 13, 2015 3:07 pm

i have used default setting on cherry and cherry:red mix both but its not working
Attachments
4a18b292-66d4-4eed-b638-6464ff9d0105.jpg

User avatar
mikej
B9 Moderator
B9 Moderator
Posts: 4182
Contact:

Re: setting for job at 50 microns and 40 slicing

Post#8 » Fri Nov 13, 2015 3:09 pm

Right, so you will need to find exposure values that work experimentally. Look at the base exposure for Cherry and try increasing that time by manually entering in a value about 10% greater than the value calculated for Cherry. (or buy some Cherry?)
Measure Twice, Cut Once.

hassan.ahmed708
Newbie
Newbie
Posts: 9
Contact:

Re: setting for job at 50 microns and 40 slicing

Post#9 » Fri Nov 13, 2015 3:16 pm

these values i put last time
Attachments
20151113141134.jpg

hassan.ahmed708
Newbie
Newbie
Posts: 9
Contact:

Re: setting for job at 50 microns and 40 slicing

Post#10 » Fri Nov 13, 2015 3:20 pm

and what should be the values of printer setting?

hassan.ahmed708
Newbie
Newbie
Posts: 9
Contact:

Re: setting for job at 50 microns and 40 slicing

Post#11 » Fri Nov 13, 2015 3:22 pm

20151113141802.jpg

User avatar
mikej
B9 Moderator
B9 Moderator
Posts: 4182
Contact:

Re: setting for job at 50 microns and 40 slicing

Post#12 » Fri Nov 13, 2015 4:06 pm

If you only plan to use the green 3rd party resin, you can continue to select the Cherry material but increase the Machine Specific Multiplier (MSM) in .1 increments until you get the result you want.
Try MSM 1.5 next?
Measure Twice, Cut Once.

hassan.ahmed708
Newbie
Newbie
Posts: 9
Contact:

Re: setting for job at 50 microns and 40 slicing

Post#13 » Fri Nov 13, 2015 4:54 pm

thanks alot if some kind of difficulties i will face i will inform you..
and if i use b9's black resin ? what will be the MSM value?
secondly i want black resin here in Pakistan how i will get?

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6601

Re: setting for job at 50 microns and 40 slicing

Post#14 » Sat Nov 14, 2015 2:59 am

The black resin from B9 has default settings. You should do a calibration print. Watch the videos.

Robert Howle
Dance like nobody's watching!

Return to “Operation”

Who is online

Users browsing this forum: No registered users and 1 guest

Close Menu Shop Forum