Grid is projected out 2 mm

Using the software
User avatar
joyas3d
B9 Maker
B9 Maker
Posts: 32
Contact:

Grid is projected out 2 mm

Post#1 » Tue Sep 29, 2015 9:22 am

Hello.

I calibrated my machine and I see that loses 2 mm on the left. it seems that the calibration grid is projected out 2 mm

Thanks a lot for the help.
Attachments
20150929081959.jpg
20150929081959 (1).jpg
Augmented Realty CAD
http://www.joyas3d.com/

Matt
B9 Moderator
B9 Moderator
Posts: 147
Contact:

Re: Grid is projected out 2 mm

Post#2 » Tue Sep 29, 2015 9:42 am

This seems to be an issue on the computer side, simply hit the "Auto" button on the projector and it will force it into the proper place. You may have to do this again if you disconnect your video cable. Also you can try using a different source input like hdmi instead of vga or vice versa.

User avatar
joyas3d
B9 Maker
B9 Maker
Posts: 32
Contact:

Re: Grid is projected out 2 mm

Post#3 » Tue Sep 29, 2015 9:48 am

Matt wrote:This seems to be an issue on the computer side, simply hit the "Auto" button on the projector and it will force it into the proper place. You may have to do this again if you disconnect your video cable. Also you can try using a different source input like hdmi instead of vga or vice versa.



Hello.

Thank you very much for the reply, I will try.
Augmented Realty CAD
http://www.joyas3d.com/

User avatar
joyas3d
B9 Maker
B9 Maker
Posts: 32
Contact:

Re: Grid is projected out 2 mm

Post#4 » Tue Sep 29, 2015 11:03 am

Hola.

The auto function edited and the grid is centered.

Muchas gracias señor Matt
Augmented Realty CAD
http://www.joyas3d.com/

Return to “Operation”

Who is online

Users browsing this forum: No registered users and 1 guest

Close Menu Shop Forum