Base&Over, T-Base&T-Over

Using the software
restrict
B9 Maker
B9 Maker
Posts: 22

Base&Over, T-Base&T-Over

Post#1 » Thu Sep 25, 2014 8:00 pm

Hi everyone

Recently, I'm trying to make print out object as accurate as possible. so, I adjust Base and Over setting differently and see what's difference with the same object.

For example, I set Base: 2 sec, Over: 0.9 sec for G+ 50xy/25z print. but I noticed when it's printing, the base projection time was only about 1 sec, then started over procedure.

that's bring out the first question..
--------------------------------------------------------------------------------------
is Base and Over time should add or decrease to get right time?

Like if I set Base 2 sec, Over 0.9 sec, the real time is...
.
Base 2 sec + Over 0.9 sec = 2.9 sec
or
Base 1.1 sec ( 2-0.9 ) + Over 0.9 sec = 2 sec.

------------

My B9C is 1.2, so I never use v1.6 software before and Software Downloads page does ask DON'T USE v1.6. but some of resin seller only have old setting. Like T-Base and T-Over time.
I was try to figure out by visit MadeSolid Printers Settings, but only get more confused.

So the second question is....
------------------------------------------------------------------

Is any equation to convert Old T-Base and T-Over to new software Base and Over?

-----------

The third question is simple...
How many poly face can software handle at one model?

is any one know the answer, please tell me. Thanks.

User avatar
behold3d
B9 Master
B9 Master
Posts: 535
Contact:

Base&Over, T-Base&T-Over

Post#2 » Fri Sep 26, 2014 12:51 am

Madesolid has settings for new software . In fact they have the setting file for you to download and import

restrict
B9 Maker
B9 Maker
Posts: 22

Base&Over, T-Base&T-Over

Post#3 » Fri Sep 26, 2014 2:06 am

Quote from behold3d on September 26, 2014, 06:51
Madesolid has settings for new software . In fact they have the setting file for you to download and import


I know MadeSolid have very detailed setting. Just couldn't figure out the equation by their settings then apply to other companies resin.

User avatar
ROSITAGIOIELLI
B9 Maker
B9 Maker
Posts: 334

Re: Base&Over, T-Base&T-Over

Post#4 » Fri May 01, 2015 4:42 pm

Sorry where did you find the base and over functions and meanings? and why do you believe that changing these parameters the printing came out more accurate?

Return to “Operation”

Who is online

Users browsing this forum: No registered users and 1 guest

cron
Close Menu Shop Forum