Casting the B9 Resin

A lost wax capable resin tuned for 70 - 200 micron slice thickness
SeaBorneScanner
B9 Maker
B9 Maker
Posts: 39

Casting the B9 Resin

Post#61 » Mon Aug 11, 2014 9:43 pm

Mike, how about we make a 3D printer which prints the flasks directly?
:)

User avatar
bvwjewelers
B9 Maker
B9 Maker
Posts: 309
Contact:

Casting the B9 Resin

Post#62 » Tue Aug 12, 2014 4:55 am

would you have suggestions on how I should use the Vulcan 3-550 for resin? It only has 3 stages and for wax It has been nothing but amazing, but after reading all this I'm not sure what the best temp, ramp up, and times should be used with only 3 stages and how resin is so much different than wax.
"BVW Jewelers using 3D Printing in all our designs." http://www.bvwjewelers.com/

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6629

Casting the B9 Resin

Post#63 » Tue Aug 12, 2014 5:08 am

Use the suggested Ransom and Randolf burnout for plasticast. I use that schedlue but use Satincast instead. Just make sure your oven is calibrated and reaches or exceeds the 1350 F on the top end.






Robert
Image
Image
Dance like nobody's watching!

User avatar
bvwjewelers
B9 Maker
B9 Maker
Posts: 309
Contact:

Casting the B9 Resin

Post#64 » Thu Aug 14, 2014 11:31 am

like always, thank you Robert. Looks like I don't have to change anything...super! ;)
"BVW Jewelers using 3D Printing in all our designs." http://www.bvwjewelers.com/

bacardifer
Newbie
Newbie
Posts: 6

Casting the B9 Resin

Post#65 » Sat Aug 16, 2014 9:17 am

Also before casting and curing your resin you can apply a layer of KRYLON FUSION for plastic ( clear) let it dry and you will get a a flat shine surface not like a orange pell casting are perfect

Return to “B9R-1-Red”

Who is online

Users browsing this forum: No registered users and 1 guest

Close Menu Shop Forum