Hi this is just my own view on this subject-- anything as simple as your design;;; or lets say a coin for example. 1 * save time and money not trying to cast resin engrave models. this model u have is flat get some http://www.castaldo.com/english/products_eg/lfi/lfi.html or http://www.riogrande.com...

Thanx all... i ll try every thing you said ..

The other end is burnout. The oven needs good airflow,

Thanx jljr99 .. what do u mean airflow in the oven .. like a fan in the oven or taking air outside .. ?

Hi all ..
i am very happy with the b9 and its 1:1 mix casting too .. but as all 3d printers we are having problems casting pieces with engraving letters or designs .. so any one succeded in casting with engraving and would like to share info of burnout or any tips .. thanx a lot

Some photos every thing is supper with b9 ...

After installing the new pcb .. first test went fine the problem didnt occure .. thanx mikej ..

Mike i forgot to say that we changed the x motor too after changing the sensor and the vat was still stuck . Its a new x motor running now ..

The thing is From the fist of this post was that after working very successfully with the b9 . Printed about 50 peices .. then the vat was stuck when came close to the sensore .. so we changed the sensor but didnt workout then mike sent me a new pcb and andrino .. and after replacing them and when i...

Robert Howle wrote:I had same prob before and it turned out to be a bad usb hub. Change your hdmi and run straight to puter.

I am not using a usb hub .. and the b9 is connected to the computer with the hdmi cable .. if this is what you mean Robert ..

Andrino is the new one u sent me .. i think its somthng from the other two .. i ll check tommorrow .. thanx mike

For the 5 time this box appers about the connection lost .. then the print button goes back to preview .. i changed the usb prot on the laptob but didnt help ..

The projector was on . But it was projecting the main screen ..
Ok i ll check the usb and retry

i guessed wrong mike,, i saw the that one , it was impossible to copy past it ,, new lesson i got today ..
it is in attachment

SoftwareVersion 1.8.0 Copyright 2015 B9Creations, LLC http://www.b9creator.com Port: COM3 Display Index: 1 Last Print Status: Aborted at layer number 184 Configuration: B9Creator v1.2.0, XY at 30 microns Job Data File: C:/Users/User/Desktop/RTP/test 1 BBB.b9j Name: test 1 BBB Description: test 1 BBB...

Mikej ,, this is the log file ,, latest 15.05.11 22:14:11.001 Debug : Program Start 15.05.11 22:14:11.002 Debug : Version 1.8.0 Copyright 2015 B9Creations, LLC http://www.b9creator.com 15.05.11 22:14:11.002 Debug : Relevent Used Application Directories 15.05.11 22:14:11.002 Debug : EXECUTABLE_DIR: &...

2

photos

I double check one more time same thaing hsppened in the middle time of printing the error box came up and the projector projected the main screen .. any solutions ??

Thanx Robert .. i did what you said befor i printed .. and the time of the print was 45 minits . And it stoped and did the problem at the 30 minits .. i followed instructions of mikej video about this multy display but . One thing i couldnt fine is the task bar button that doesnt allow to show task ...

Mike j .. i installed the 1.8 software .. and did the first test .. but in the mid time of printing .. an error table occured .. saying mechanism jamed .. and i looked at the projector and found it projecting the windows main screen .. how can I fix it ?