HI everyone After a year or so of not using im going to put this machine back to work.I cannot find my calibration grid set i bought.!!! :twisted: looking to calibrate machine 1.2 i cannot find download links to calibration grids .. first you will need to print off and cut out the calibration grid m...

WHITE BIORES material

question is this good for steam cleaning.

Problem solved bent arduino projector conection....

might not be same one hes talking about but it has the info you are looking for. there is a gold refining machine for about 30k but its pretty big made in turkey. but i never found anything that would work in a small shop like mine. So if anybody has come up with a machine for under 15k im intereste...

My printer just locks up i cannot close the print status screen or shutdown proyector. Prints start but after 3 hours or so the printer stops proyector stays on but not exposing anything. no jammed error or proyector erros it just stops. I have checked all arduino connections cleaned them and put ev...

good evening guys-gals I have casted this formlabs resin and its not very good. I would say its a asiga wax clone because the evisiontec wax takes more care to burnout so its somewhere in the middle. The prints have a sweaty surface to them .. quality wise b9 and asiga will always have better prints...

Good afternoon forum I need to purchase the VAT home sensor and a spare.I narrowed problem down to sensor and not cables or software. Some resin got into the sensor cleaned it but its very unstable. Sensor has worked flawless these past four years.. 1.2 machine. Time to let him go can support give m...

yeah i havent had any good feedback from any of these companies..i have given up on the idea for now maybe 5 more years. The positive side i have saved up some money and i am looking to buy a 4 or 5 axis mill before my wife finds out wax wood brass---ect.. need more toys in shop..

uv cure and then you can always microwave on water 5min as a final cure . Then invest let bench sit for 2 hrs min..

I have pc +printer+proyector on a voltage regulator and 2 hr backup battery. I have only noticed reduced lines based on orientation of model and in perfect calibrating of proyector 1.2 and earlier*golden arm must be perfect*. I use usb microscope for focus cheap 20$ ebay .

Hi franz I was really hoping i could get a gold refining system for small shop -since everything has become more available to public 3d printers b9creator 8-) ...4-5 axis cnc laser engravers ect...ect.... but i guess i will just have to keep sending my gold to refiner**** I dont want or have space f...

I havent heard anything good about shor products...i found a small machine there are several companies that sell these types of machines just wanted to know if there was anybody here using them.. here is one i am looking to get if i get real facts on it. I find it strange it only has one review most...

Can Anybody Help#

HI I have been thinking about buying a gold refining machine since i am always doing alloys and sometimes i run out of pure gold and have to order. SO to make story short i wanted to know if there was someone in this forum who knew what machine actually works ----point me in the right direction ---s...

Bought the housing and lamp from b9 so it was very easy to change. I just went to 1.8 msm and no luck i will double check everything if the color wheel is broken could this be the problem.

Another question does anybody know how much the color filter the one that always breaks on thes proyectros cost and where to get it.

Hi I just changed the lamp on a 1.1 machine d535 vivitek and did a test print using b9file. I reset lamp hours and did a few prints on 50.8z slice 50 micron. started out at 1msm and gradually raised each print to a big 1.650 msm to start getting results. Any ideas of what could be wrong.To me it loo...

object has open surfaces or inverted normals.

16hours thats alot of pusnishment...

great pics and nice rings!!!!!!